CONSTRUCTION:

1.      Conductor: Sizes 8 - 3/0 AWG use a stranded combination-unilay soft drawn annealed bare copper per ASTM B3 and B787. Sizes 4/0 AWG and larger use a stranded compressed annealed bare copper per ASTM B3 and B8.

2.      Insulation: Heat and moisture resistant Polyvinyl Chloride (PVC)

3.      Sheath: Nylon jacket utilizing SIMpull® Technology

APPLICATIONS AND FEATURES:

Southwire SIMpull® THHN/THWN-2 copper conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the National Electrical Code® and other applicable codes and standards. Voltage for all applications is 600 volts. SIMpull® THHN/THWN-2 copper conductors are designed to be installed without the application of a pulling lubricant. These conductors have multiple ratings depending upon the product application. Allowable temperatures are as follows:

• THHN or T90 Nylon: Dry locations not to exceed 90°C

• THWN-2: Wet or dry locations not to exceed 90° C or locations not to exceed 75°C when exposed to oil

• TWN75: Wet locations not to exceed 75°C

• MTW: Wet locations or when exposed to oil at temperatures not to exceed 60°C or dry locations not to exceed 90°C (with ampacity limited to that for 75°C conductor temperature per NFPA 79)

• AWM: Dry locations not to exceed 105°C only when rated and used as appliance wiring material

FEATURES

• Sunlight resistant: 8 AWG and larger

• Gasoline and Oil Resistant II

• CT Rated: 1/0 AWG and larger

• VW-1: All Sizes

• FT-1: All Sizes

• AWM: Sizes 14 through 6 AWG

• MTW: Stranded Constructions Only

• RoHS Compliant

• LEED v4.1: Materials & Resources Credit MRc6; PBT (Lead Content Below 300 ppm Threshold)

SPECIFICATIONS:

•  ASTM B3 Soft or Annealed Copper Wire

•  ASTM B8 Concentric-Lay-Stranded Copper Conductors

•  ASTM B787 19 Wire Combination Unilay-Stranded Copper Conductors

•  UL 83 Thermoplastic Insulated Wires and Cables

•  UL 758 Standard for Appliance Wiring Material

•  UL 1063 Machine Tool Wiring (MTW)

•  UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)

•  CSA C22.2 No. 75 Thermoplastic Insulated Wires and Cables

•  ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

•  Federal Specification A-A-59544

•  NMX-J-010-ANCE Thermoplastic insulated wires and cables

•  NOM-063-SCFI Electrical Products – Conductors – Safety Requirements

•  NEMA 70901-2-2024 Make It American Compliance with Domestic Preference Requirements Pt. 2 Wire & Cable